Once you are logged in, the app will load. It will open to the Home Screen. In the Upper Right Corner, you'll see two Icons.
Device Status
Bridge Status
Click on the Icons and a drop-down menu will appear.
Device Status (Cloud)
When properly logged in, it will be BLUE
Bridge Status (Box)
Once logged in and connected, it will be BLUE (Wifi) or Green (Cellular).
If it is RED, you will not be able to control your lights
Once the lights are turned via the Sequences tab, you can turn the lights off manually, by tapping the "Turn Off" button.
Under Personal, you will find any lights that you've made and saved.
Here you will find over 90 pre-set sequences from Everlights. Click on one of the drop down menus to select one for your building.
These are light sequences that have been sent to you from other EverLight customers.
From this tab, you can setup your lights to turn on Automatically. You can do a week, a month, or a year in advance.
From this screen, you can check the status of your Bridge, Zone(s), Account Information or Device Settings
Page will show the last time your Bridge was updated and last time you connected to your bridge via the app (Ping).
If you have multiple properties and multiple Bridges, this is where you would swap back and forth to control the lights at each property.
Page will show you all the zones that are connected to your Bridge. It will also show you if your zone (wireless receiver) is "Connected" (talking to) the Bridge. It will also show you the status of your lights, Off, or On and the light pattern you have selected for that zone.
Your zone length is also shown from this screen.
Contains the app version, Autopilot (toggled On or Off),
Basic account information and the ability to logout of your account
Here you find links from EverLights.
There is also a Support email and Support phone number directly to the EverLights HQ in Utah.
Copyright © 2024 Light ME Up - All Rights Reserved.
Powered by GoDaddy